Home page
Our products
OWATROL ALU
Home page
Products
F.A.Q
Buy online
Contact
Protect / Varnish
Remove/Clean/Restore
Treat / Paint
Owatrol Original
MSDS
Product information
Where to buy
Become a distributor
Testimonials
Our Facebook Site
Tweet
Marine aluminium paint
OWATROL ALU
Technical Data Sheet (pdf)
Safety data sheet
Where to find the product ?
WHERE TO USE ?
Coating for aluminium, steel and galvanized surfaces above waterline such as metal parts, trailers, pipes, pumps,…
PROPERTIES
Insulates and provides rust protection.
Provides good brightness, coverage and lasting adherence with high quality aluminium pigment.
Apply direct to rusted surfaces - fast and easily.
Resists temperatures up to +347˚F (175˚C) when dry.
SURFACE PREPARATION
Remove loose rust, scale and poorly bonded paint.
Surfaces must be clean, dry, free of dirt and grease.
Cover everything you do not wish to coat.
APPLICATION
Use as is, do not thin.
Stir thoroughly before and periodically during application.
Apply a saturating coat of OWATROL-ALU to rusted or bare steel areas.
Allow 24-48 hours for drying before applying a recommended second coat.
NOTE
Any rags soaked in OWATROL-ALU may spontaneously catch fire if improperly discarded.
Rags must be saturated with water after use or placed in a sealed, water filled metal container, before disposing with household waste.
Information :
Coverage rate per coat :
18m²/l - 194 sq/ft
Application tools :
Brush - Roller - Airless spray
Application temperature :
+5°C to +35°C
Touch dry / Recoat time :
12H. / 24-48H.
Clean-up :
Mineral spirits
Container size :
0.5 LITER (0.53 U.S QUART)
2.5 LITERS (0.66 U.S. GALLON)
© HUEHN & PARTNERS - "OWATROL ASIA-PACIFIC" - PO Box 227 - Cannonvale QLD 4802 - Australia -
Legal notices